![]() ![]() running a 6+ year old TC for windows is like getting elephants to dance. Full access by all users by default is not allowed. This screenshot is taken from the old Mac version of the utility which looks somewhat different but also has the same functionality. In airport disk guest access turn on read and write access for all users. buy a cheap one disk standard PC network storage (WD or Seagate make network drives that cost a fraction over the price of a bare disk). In the windows version of the airport utility go to the Disk/ File Sharing tab. so ask again if you want to try and I will have a go. I have described this setup several times. Open System Preferences from the Apple menu Then, click on Network Here, select. that might also be a solution if you are running a laptop. For Windows 10 users: Open the Start menu, type in, and select Command. it is nifty as you are routing through the TC without double NAT. Download AirPort Utility 5.6.1 allows you to configure and manage the new AirPort Express with simultaneous dual band 802.11n. If the issue still persist, try the below method. Let the driver install and then check the functionality. ![]() Check Run this program in Compatibility mode. ![]() But your computer must be plugged directly to the TC for this to work. Right-click on the setup file of the USB drive and select Properties. and try pinging the TC by name including the domain and not just IP.Ĥ. If your Optimum router allows set the domain name to local. The TC seems to be locked to using local as domain. The TC is sometimes difficult to reach because the hard disk access might need to have the domain correct. Try turning on guest disk access, on the disk tab.ģ. and SMB2 or SMB3 with the older TC you might be having a real network incompatibility. Plug the computer directly into a LAN port of the TC and try again.Ģ. Select I connect to the Internet with a DSL or cable modem using DHCP, click Continue. I need to figure out a safer way to communicate with TC.ġ. I enable it only in Windows only when I need to access the TC. Windows still ships with it just for compatibility reasons with older hardware. I had disabled SMB 1.0, since only cheap hardware should require outdated SMB 1.0 support because of lazy devs/vendors that didn't care to upgrade to more modern version of the protocol. It solved the issue for me.ĭue to security concerns about ransomware like WannaCrypt I disabled the culprit SMB1 file sharing protocol from my Windows 10 machine, fearing an attack would reach through the local network my valuable Time Capsule 4th gen hard drive, used for online photo and video backup. A list opens, scroll down until you reach "SMB 1.0/CIFS File Sharing Support". Look for the above option at Control Panel's left side. AirPort Utility v5.3.1 is the simple to use, setup and management utility for the AirPort Express Base Station, the AirPort Extreme Base Station and Time Capsule. Check if SMB 1.0 support is enabled in Windows:Ĭontrol Panel -> Programs and Features -> Turn Windows features on or off ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |